久久电影国产,99xxxx综合,久久久久久久99精品免费观看,久久精品国产欧美日韩亚洲,日韩亚洲自拍黄色在线免费,免费人成视频网站网址,99福利视频

客戶榮譽
kehury
技術文章
  • 唐山molbox RFM Gas Flow Calibrator Kits 5144
  • 萬用表應用技巧
  • 室內溫度濕度多高人體才覺舒適?
  • 場強儀測量單位換算表
  • 手動洛氏硬度計的正確使用
  • 維氏硬度計的適用場合
  • 各種煙氣分析方法的適用比較
  • 威力巴流量計測量不準的原因分析
  • 環境監測儀器發展
  • 壓力表的常見問題及解決措施
  • 唐山橄欖莊園進口食品有限公司
    唐山廣野食品集團有限公司銷售分公司
    唐山哈帥德清真食品有限公司
    唐山浩義機械設備有限公司
    唐山賀鑫機械設備有限公司
    唐山凱捷機電設備有限公司
    唐山凱生電機有限公司
    河北袋袋鼠食品有限公司
    河北鋼鐵股份有限公司唐山分公司冷板廠
    河北每日好食品有限公司
    河北千村綠食品有限公司
    河北省建安商貿有限公司
    河北唐山祥達物資有限公司
    河北文豐集團 唐山文豐山川輪轂有限公司
    遷安市萬贏食用菌種植專業合作社
    遷西縣金特食品有限公司
    遷西縣綠野養雞專業合作社
    唐山安豐機械設備有限公司
    唐山邦柯鐵路設備有限公司
    唐山寶柱食品有限公司
    唐山東汽發電設備有限公司
    唐山麗潔食品有限公司
    唐山銳興機械設備制造有限公司
    唐山森特自動化儀表有限公司
    唐山盛輝鋼鐵有限公司
    唐山市豐南區君曄機械制造有限公司
    唐山市豐南區俊怡營養食品有限公司
    唐山市豐南區維邦園林機械有限公司
    唐山市豐潤區宏鑫機械設備有限公司
    唐山市豐潤區啟鑫冷拉型鋼有限公司
    唐山市豐潤區潤馳貿易有限公司
    唐山市豐潤區田源純凈水有限公司
    唐山市豐潤區香香肉食品加工廠
    唐山市豐潤區智恒達金屬制品有限公司
    唐山市禾嘉食品有限公司
    唐山市華瑞鑫農面粉有限公司
    唐山市江南醇酒業有限公司
    唐山市金順機械設備有限公司
    唐山市聚善齋食品有限公司
    唐山市鈞陽機械有限公司
    唐山市開平區雷曼食品廠
    唐山市路北區德祥鑫消防器材有限公司
    唐山市日興食品有限公司
    唐山市味美佳食品有限公司
    唐山市祥潤食品有限公司
    唐山市雨之諾純凈水有限公司
    唐山帥鑫食品有限公司
    唐山順曌貿易有限公司
    唐山思諾食品有限公司
    唐山四通食品有限公司
    唐山萬通順和實業有限公司
    唐山新鑫鋼鐵有限公司
    唐山鑫勇進鋼鐵貿易有限公司
    鑫潤商貿商貿有限公司
    玉田縣恒碩機械設備制造有限公司
    玉田縣億鵬機械制造有限公司
    御品慶豐(唐山)食品有限公司
    當前位置:首頁 > 唐山儀器儀表 > 唐山電子電工 > 唐山計量校準
    molbox RFM Gas Flow Calibrator Kits
    型 號:5144
    品 牌:美國福祿克FLUKE
    技術指標:Maximum working measurement line pressure  600 kPa (87 psi) absolute
    唐山molbox RFM Gas Flow Calibrator Kits-5144-美國福祿克FLUKE


    High end gas flow calibration made simple

    Fluke Calibration 5141, 5142 and 5144 molbox RFM gas flow calibrator kits feature molbox RFM and molbloc-L configurations optimized to cover a very wide workload combined with molstic-L and other interconnect hardware needed for a complete calibration system. Simply supply 90 psi of pure N2 or air to the system. An included regulator delivers a stable regulated flow to the molbloc. Downstream of the molbloc, an included metering valve allows you to regulate the mass flow value required for the DUT. It’s that simple; supply 90 psi gas upstream, tare the reading, and adjust the fine metering valve to deliver the desired mass flow rate with an accuracy of ± 0.5 % of reading. Fluke Calibration gas flow calibrator kits eliminate complication, but don’t compromise molbox/molbloc best in class performance.

    ·          Flow ranges cover from 1 sccm to 50 slm

    ·         ± 0.5 % of reading total one-year accuracy

    ·         Measures mass and volume flow with user settable reference pressure and temperature conditions

    ·         Reference standard is upstream of the device under test, eliminating cross contamination and expensive damage to the flow elements

    ·         Integrated gas flow regulation and adjustment hardware

    ·         Expandable to over 5000 slm with additional molbloc flow elements and control hardware

    ·         Includes traceable calibration for operation in N2 and Air, with corrections for other gases

    ·         Gas supply and test adapters included for 1/4 in tube, 1/4 in NPT and 1/4 in BSP

    ·         Includes advanced functions such as totalize, average, hi/lo, deviation, on-board purge, leak test and tare, available from the front control panel or by RS-232 and IEEE-488 remote interfaces

    A new standard in high end gas flow calibration

    Fluke Calibration revolutionized high end gas flow calibration with the introduction of molbox/ molbloc mass flow standards. molbox/molbloc systems have replaced large, inflexible, error prone volumetric piston provers and bell provers with a compact, easy to use, versatile digital standard. molbox/molbloc systems are the standard of choice for high end calibration labs and mass flow device manufacturers around the world. Improvements offered by molbox/molbloc include:

    ·         True mass flow calibration and traceability— no corrections from volumetric to mass

    ·         Real-time digital mass flow indication, loaded with features—easily automated

    ·         No moving parts—uninterrupted gas flow measurement, no fluctuations from piston stroke

    ·         Flexibility to be positioned upstream or downstream— can calibrate at many line pressures

    ·         Modular components allows future upgrade and expansion

    ·         Very wide range with small footprint—no flow straightening hardware required

     Whether your requirement is manual calibration of a simple variable area flow meter (rotameter) or fully automated calibration of a mass flow controller (MFC), molbox/molbloc systems offer the ideal solution. A molbox RFM with one or more molbloc flow elements can cover a wide range of flow calibration devices with total one-year measurement uncertainty of ± 0.5 % of reading. If your needs change, molbloc flow elements can be added, with models covering flows from 1 sccm to over 5000 slm (175 scfm). If better measurement uncertainty is needed, the same flow elements can be used with molbox1+ to achieve accuracy as good as ± 0.125 % of reading.

    Measurement specifications

    Gas calibration included

    Nitrogen (N2), Air

    Maximum working measurement line pressure

    600 kPa (87 psi) absolute

    Measurement range

    <1sccm to 50 slm, depending on model. Flow ranges depend on test gas. Ranged indicated for N2 and Air.

     

    型號

    描述

    5141-100

    molbox RFM, molbloc 5E1-L 10 to 100 sccm

    Included:

    ·        molbox RFM (5141 kits) or molbox RFM-M (5142 and 5144 kits) reference flow monitor with quick connect molbloc pressure lines, molbloc communication cable, line cord and user manual

    ·        molbloc 5E1-L laminar flow element 

    ·        molstic-L mounting system, with fine pressure regulator and an isolation valve and precise flow metering valve for each molbloc-L

    ·        Tubing and adaptors to connect gas supply and device under test, including 1/4 in tube fitting, 1/4 in NPT female, 1/4 in NPT male, 1/8 in NPT male and 1/4 in BSP male

     

    5141-1K

    molbox RFM, molbloc 5E2-L 100 to 1,000 sccm

    Included: 

    ·        molbox RFM (5141 kits) or molbox RFM-M (5142 and 5144 kits) reference flow monitor with quick connect molbloc pressure lines, molbloc communication cable, line cord and user manual

    ·        molbloc 5E2-L laminar flow element 

    ·        molstic-L mounting system, with fine pressure regulator and an isolation valve and precise flow metering valve for each molbloc-L

    ·        Tubing and adaptors to connect gas supply and device under test, including 1/4 in tube fitting, 1/4 in NPT female, 1/4 in NPT male, 1/8 in NPT male and 1/4 in BSP male

     

    5141-10K

    molbox RFM, molbloc 5E3-L 1 to 10 slm

    Included: 

    ·        molbox RFM (5141 kits) or molbox RFM-M (5142 and 5144 kits) reference flow monitor with quick connect molbloc pressure lines, molbloc communication cable, line cord and user manual

    ·        molbloc 5E3-L laminar flow element

    ·        molstic-L mounting system, with fine pressure regulator and an isolation valve and precise flow metering valve for each molbloc-L

    ·        Tubing and adaptors to connect gas supply and device under test, including 1/4 in tube fitting, 1/4 in NPT female, 1/4 in NPT male, 1/8 in NPT male and 1/4 in BSP male

     

    5141-50K

    molbox RFM, molbloc 3E4-L 5 to 50 slm

    Included: 

    ·        molbox RFM (5141 kits) or molbox RFM-M (5142 and 5144 kits) reference flow monitor with quick connect molbloc pressure lines, molbloc communication cable, line cord and user manual

    ·        molbloc 3E4-L laminar flow element 

    ·        molstic-L mounting system, with fine pressure regulator and an isolation valve and precise flow metering valve for each molbloc-L

    ·        Tubing and adaptors to connect gas supply and device under test, including 1/4 in tube fitting, 1/4 in NPT female, 1/4 in NPT male, 1/8 in NPT male and 1/4 in BSP male

     

    5142-1K

    molbox RFM-M, molbloc 5E2-L 10 to 1,000 sccm

    Included: 

    ·        molbox RFM (5141 kits) or molbox RFM-M (5142 and 5144 kits) reference flow monitor with quick connect molbloc pressure lines, molbloc communication cable, line cord and user manual

    ·        molbloc 5E2-L laminar flow element 

    ·        molstic-L mounting system, with fine pressure regulator and an isolation valve and precise flow metering valve for each molbloc-L

    ·        Tubing and adaptors to connect gas supply and device under test, including 1/4 in tube fitting, 1/4 in NPT female, 1/4 in NPT male, 1/8 in NPT male and 1/4 in BSP male

     

    5142-10K

    molbox RFM-M, molbloc 5E3-L 0.1 to 10 slm

    Included: 

    ·        molbox RFM (5141 kits) or molbox RFM-M (5142 and 5144 kits) reference flow monitor with quick connect molbloc pressure lines, molbloc communication cable, line cord and user manual

    ·        molbloc 5E3-L laminar flow element 

    ·        molstic-L mounting system, with fine pressure regulator and an isolation valve and precise flow metering valve for each molbloc-L

    ·        Tubing and adaptors to connect gas supply and device under test, including 1/4 in tube fitting, 1/4 in NPT female, 1/4 in NPT male, 1/8 in NPT male and 1/4 in BSP male

     

    5142-50K

    molbox RFM-M, molbloc 3E4-L 0.5 to 50 slm

    Included: 

    ·        molbox RFM (5141 kits) or molbox RFM-M (5142 and 5144 kits) reference flow monitor with quick connect molbloc pressure lines, molbloc communication cable, line cord and user manual

    ·        molbloc 3E4-L laminar flow element 

    ·        molstic-L mounting system, with fine pressure regulator and an isolation valve and precise flow metering valve for each molbloc-L

    ·        Tubing and adaptors to connect gas supply and device under test, including 1/4 in tube fitting, 1/4 in NPT female, 1/4 in NPT male, 1/8 in NPT male and 1/4 in BSP male

     

    5144-50K

    molbox RFM-M, molblocs 5E2-L and 3E4-L10 sccm to 50 slm

    Included:

    ·        molbox RFM (5141 kits) or molbox RFM-M (5142 and 5144 kits) reference flow monitor with quick connect molbloc pressure lines, molbloc communication cable, line cord and user manual

    ·        molbloc 5E2-L and 3E4-L laminar flow elements

    ·        molstic-L mounting system, with fine pressure regulator and an isolation valve and precise flow metering valve for each molbloc-L

    ·        Tubing and adaptors to connect gas supply and device under test, including 1/4 in tube fitting, 1/4 in NPT female, 1/4 in NPT male, 1/8 in NPT male and 1/4 in BSP male

     


    ,
    同類產品
    地址:青島市嶗山區海爾路29號溫哥華花園5-1-401
    電話:0532-86069117 83812497 83821263
    傳真:0532-88786387 網址:www.mwengtc.com
    青島東方嘉儀電子科技有限公司 版權所有 備案號: 魯ICP備08106748號